Floor Scale set up procedure
1.
The floor scale you are receiving has already
been calibrated at the factory. Please
do not attempt to re-calibrate it without first contacting the factory.
2.
The floor scale base has four black rubber feet.
One located in each corner. Unscrew
the feet at least ½ inch and level the scale (If the feet are not unscrewed ½
inch the scale will not weigh properly)
3.
The cable for the weight indicator is located in the
side access compartment of the floor scale.
Please connect it to the weight indicator.
4.
Turn on the weight indicator.
You are now ready to begin using your scale
We normally ship the weight indicator by
UPS and the floor scale by
truck. They
usually arrive within a day or two of each other
Thank you
